Most of the time, a media console falls into one of these categories:
1. Often Stocked. You can often find this particular console (this particular style and wood/finish) ready to ship because it is pretty popular and we regularly make it. Because it is popular, it might also be out of stock at times, but with shorter wait times because we build it pretty frequently.
2. Not Often Stocked. You might find this console in stock. Why it might be made to stock now and then is more art than science and we will leave it there. In the case of Cherry consoles, you might see shorter wait times for a period of time because until we lock in the stain toward the end of the process, it can be made into any of our offerings.
3. Make Just for You. This designation applies to Walnut and a few models where the alternate configuration (e.g. all drawers) is not in huge demand but we are prepared to build it when required.
So here is the bottom line: if what you want falls into the second category, grab it if we have it or allow time for us to build it. if what you want is in the third category, allows leave time for us to make it. We often do better than our estimates and only rarely go longer. No matter what, it is worth the wait to get the fine furniture you seek for many years of enjoyment.
Overall: 72w 26.5h 22d
Enclosures: 19.75w 20.5h 20.25d
Center Shelf: 29.25w 9.5625h 20.25d
Adjustable Vented Wood Shelves: 19.5w .5h 16.25d
Front floor clearance: 2.25h
Rear floor clearance: 3.75h
Shelf Spacing: 32mm (11 positions)
Top Shelf: ~200 lb
Adjustable Vented Wood Shelf: ~60 lb each
Bottom Wood Shelf: ~95 lb each side
Drawer: 25 lb
Enclosure: Up to 3 A/V components each
Media Drawer Storage: about 136 CDs, 84 Blu-Rays, or 48 DVDs
(possibly more if you store DVDs and Blu-Rays on their short side)
Make sure that your gear will have adequate airspace around it, especially top-venting components, as excessive heat can harm A/V gear and furniture. Easy-to-install, ultra-quiet fan panel kits available.
Top Panel, End Panels, Fixed Middle Shelf, Face Frame, Door Frames, Drawer Front, Feet: Solid Ash, Cherry, or Walnut Lumber
Partition Panels, Wood Shelves, Bottom Panel: Lumber-banded Select Ash, Cherry, or Walnut A1 Veneer Core Plywood Veneer
Back Panels, Drawer Dividers: Birch A1 veneer core plywood veneer
Drawer Box sides: 9-layer American Baltic Birch (fully finished)
Door Glass: Tempered Safety, 1/8" (clear or dark gray tint)
Door and Back Panel Catches: Roller
Knobs: Zinc die-cast, oil-rubbed bronze or satin nickel finish
Drawer Slides: Accuride zinc, ball-bearing, full-extension, 100 lb. rating
Wheels: 50MM diameter, soft rubber, non-marking, fixed 1 direction
All lumber responsibly grown and harvested from the Appalachian Hardwood Region of the Eastern USA. All plywood made in USA, no formaldehyde added, and fully CARB compliant.
Shipment: 225-240 lb (carton on shipping pallet + glass box)
Console in Carton: 170-185 lb
Bare Console: 145-160 lb
1 x Standout Haven EX 72w Media Console
4 x Adjustable vented wood shelves with 16 supports
2 x Tempered door glass panes (gray tint or clear)
4 x Drawer dividers with 8 brackets
1 x Anti-tip safety strap kit
1 x 4mm hex wrench (for front leveler adjustment)
1 x Owner's Guide
I purchased the 72 inch Haven EX a few months ago. I recently moved and my previous AV furniture no longer fit the space. I looked at some of the larger manufacturers to compare to Standout. Standout Designs was able to customize the center speaker cabinet by making it taller and the drawer shorter. I was then able to use my existing B&W speaker set up, which was a high priority for me.
The Haven is what I would call subtle high quality. It doesn't call attention to itself and you realize it's quality on second look. It is not the least expensive option, but I can say it is both a substantial price AND good value! I could see myself still using and enjoying this piece of furniture for the next 20 years.
I have bought not one, but two of the 'Standout' consoles to hold a 75" television and the various components as the centerpiece for my entertainment center.
The first one was the standard design composed of cherry wood with the espresso stain. I bought it after doing my research into who has the 'best' consoles on the market, and Standout Design came out on top. It was delivered without a hitch and the guys who delivered it set it up in my house as advertised. It was a high quality, beautiful piece of furniture that complemented the rest of the room.
So, number two came about after I bought a new center speaker: I had measured a speaker, but when I purchased I bought a top line Revel instead of the one I had measured! The new speaker was too big for the standard console, so given my pleasure with the Standout Console I had, it was a no-brainer to visit with Alan about a new one, but customized to fit the new speaker. He and his team were able to do a custom job and my new speaker fit perfectly. The new console, as before, is a fine piece of furniture constructed by craftsmen (and women no doubt) that serves as a centerpiece in the den.
What happened to the first one? I gave it to a young person who is very proud of having his first piece of high class furniture.
Bottom line: highly recommend if you are in the market for a console that is 'fine furniture'
Bought this unit in October 2017 and received it in December. We selected a custom wood and stain combination that better matched our room furnishings. Alan sent out both standard and custom stained samples that we could choose from in our build and continued to work with us throughout the selection process. The unit arrived undamaged and presents beautifully in our home theater. The cabinet spaces are sized nicely to accommodate six different audio/video pieces including two receivers as well as a large center channel speaker. Since I use two receivers, I had Standout include powered ventilation that kicks on silently when cabinet temperature rises. We also had Standout included the smoked glass and make a center channel cover for this media center to disguise the electronics and speaker. The entire cabinet is built well of quality materials and had plenty of wire receptacles in order to route and hide speaker and power wires, HDMI and Cat6 cables. Additionally, this unit sets close to the floor allowing us to camoflage all those exposed wires radiating from its backside. Side Note: I looked at many different media centers from many different manufacturers. Most of these were sized wrong, wouldn't fit my components and were built of pressed wood and cheaper materials. Standout has built its reputation on serving the audio/videophile community with products that are proportioned nicely and present beautifully in the home.
Standout Designs furniture and accessories ship within the continental United States and to the provinces of Canada.
Furniture and accompanying accessories ship via national freight carrier ("LTL truck").
Accessories not shipping with your furniture ship via UPS, USPS or another parcel service.
Shipments originate in Pennsylvania.
Furniture will be brought to your home and out of bad weather. This is normally into your home but might be into the garage at delivery person's discretion.
If you live in an apartment building, a freight elevator is required to deliver above the ground floor.
Want or require unpacking, placement, dunnage removal or stair carry beyond a few external steps manageable with a hand-truck, choose White Glove Delivery.
See below for other fees associated with Canadian delivery.
White Glove Delivery is performed by one or two people depending on the size of the pieces ordered and whether or not flights of stairs are involved.
Your furniture will be brought to the room of your choice, unpacked, and positioned. Dunnage will also be removed upon request.
Additional charges will apply to carry the furniture up/down more than two flights of internal stairs. Please contact us for more information.
Per our return policy, you must retain the packaging, including the shipping pallet, in order to return a furniture piece.
The delivery team does not install shelves, door glass, or accessories nor do they handle electronics.
White Glove Delivery is available to most USA customers. Canadian customers can contact us for a White Glove Delivery quote. Not available to all areas.
White Glove Delivery adds 1-3 business days to transit time.
Furniture deliveries are made Monday – Friday during normal business hours, excluding major holidays.
Deliveries are made by appointment with the freight carrier. Appointment windows are typically between 2-4 hours.
Appointment days and times are set by the carrier and vary by location.
You must be present to inspect and sign for the shipment.
We are pleased to offer Standout Designs furniture to our neighbors to the north.
GST/PST is additional and is not collected by Standout Designs.
You must engage a broker to speed your furniture through customs.
We can recommend Pacific Customs Brokers ("PCB"). The fee for Standout customers is CA$110 plus a nominal credit card processing fee.
You can contact PCB at 888-538-1566 for more information. Be sure to mention Standout Designs when you call.
We can also work with a different broker that you designate.
If all furniture items on your order are in stock, we typically ship your order the next business day (possibly the same day if early enough in the morning).
Lead times vary for out of stock items from 1-8 weeks and we connect with you before shipping.
Your shipment will most likely take from 1 to 5 business days in transit to reach you.
For White Glove Delivery, add an extra 1-3 business days.
Delivery to some zip codes may be longer.