Customized Horizon EX 64-inch Solid Wood Media Console (Center Speaker Shelf and Media Drawer)

If you need any assistance, please reach out. We are happy to help you!

Overview: What You Can Customize

• Make it a 2-tone
• Choose a different hardware color
• Choose a taller base to add 2" to overall height
• Lower the speaker shelf
• Reduce the width from the center section
• Add or reduce the console's depth

Make It 2-Tone

You can optionally select a second wood/finish to make this a 2-tone unit. Choose No if you want the entire console to be in a single wood/finish. In 2-tone units, the second wood/finish is used for the drawer fronts and/or door frames.

2-Tone Wood/Finish

Swatches appear when you choose to build a 2-tone. Choose the wood/finish for the drawer fronts and/or door frames.

Knob Color and Pull

Choose your desired knob and pull color. You can choose Brushed Nickel (used on standard Horizons or Oil-rubbed Bronze (shown below).

Bottom Base

Choose Tall (+2") to increase overall height, from the bottom, by 2" (24-3/8" overall). Interior height of enclosures remains the same.

Speaker Shelf Modification

Lower the speaker shelf to accommodate a taller center channel speaker or gear. The standard adjustment is the maximum we can lower the shelf while leaving the drawer fully functional as a media drawer. Available shelf height increases to 11-7/8". Lowering the shelf means that our center grill add-on option will no longer fit.

Custom Speaker Shelf Height

This question appears when you choose a custom shelf adjustment. Make sure to enter an amount greater than the height of your speaker by at least 1/4" inch. An 10" tall speaker shelf, for example, will not fit an 10" tall speaker.

Width Reduction from Center Section

Choose 2" Increment to select the amount, in 2" increments, to reduce width from the middle section. If you choose Custom Amount, you will enter the precise amount to reduce the width.

Width Reduction Amount

Choose to reduce width by 2", 4", 6" or 8".

Custom Width Reduction Amount

This question appears when you choose a custom width reduction. Enter an amount under 8".

Depth Addition

You can add 2", 4" or a custom amount (up to 4") to the depth. Any amount over 24" adds significant labor that is reflected in the price.

Custom Depth Addition Amount

This question appears when you choose a custom depth reduction. Enter an amount less than 4".

Depth Reduction

This option appears when you choose no depth addition. Standard depth reductions are in 2" increments. If you choose a custom depth reduction, you will then need to enter an amount under 6". Adjustable shelves are adjusted in depth as well.

Depth Reduction Amount

Choose to reduce depth width by 2", 4", 6".

Custom Depth Reduction Amount

This question appears when you choose to make a custom reduction adjustment. Enter an amount under 6".

Dimensions

Overall: 64w 24.375h 22d

Enclosures: 19.75w 19.375h 20d

Center Shelf: 20w 9.625h 20d

Adjustable Vented Wood Shelves: 19.5w .5h 16d

Rear floor clearance: 2.25h

Shelf Spacing: 32mm (9 positions)

Capacity

Top Shelf: ~200 lb

Adjustable Vented Wood Shelf: ~60 lb each

Bottom Wood Shelf: ~95 lb each side

Drawer: 25 lb

Enclosure: Up to 3 A/V components each

Media Drawer Storage: about 102 CDs, 56 Blu-Rays, or 48 DVDs
(possibly more if you store DVDs and Blu-Rays on their short side)

Make sure that your gear will have adequate airspace around it, especially top-venting components, as excessive heat can harm A/V gear and furniture. Easy-to-install, ultra-quiet fan panel kits available.

Materials

Top Panel, End Panels, Fixed Middle Shelf, Door Frames, Drawer Front, Base: Solid Ash, Cherry, or Walnut Lumber

Partition Panels, Wood Shelves, Bottom Panel: Lumber-banded Select Ash, Cherry, or Walnut A1 Veneer Core Plywood Veneer

Back Panels, Drawer Dividers: Birch A1 veneer core plywood veneer

Drawer Box sides: 9-layer American Baltic Birch (fully finished)

Door Glass: Tempered Safety, 1/8" (clear or dark gray tint)

Hinges: Salice soft-close, self-close

Knobs and Pull: Zinc die-cast, satin nickel finish

Drawer Slides: Accuride zinc, ball-bearing, full-extension, 100 lb. rating

Wheels: 50MM diameter, soft rubber, non-marking, fixed 1 direction

All lumber responsibly grown and harvested from the Appalachian Hardwood Region of the Eastern USA. All plywood made in USA, no formaldehyde added, and fully CARB compliant.

Weight

Shipment: 215–220 lb (carton on shipping pallet + glass box)

Console in Carton: 155-170 lb

Bare Console: 120–135 lb

In the Box

1 x Standout Horizon EX 64w Media Console

4 x Adjustable vented wood shelves with 16 supports

2 x Tempered door glass panes (clear or gray tint)

3 x Drawer dividers with 6 brackets

1 x Anti-tip safety strap kit

1 x 4mm hex wrench (for front leveler adjustment)

1 x Owner's Guide