Skip to content

Customized Haven EX 64-inch Solid Wood Media Console (Center Speaker Shelf and Media Drawer)

  • Handcrafted in the USA using American solid wood
  • Ships FREE to your home, fully assembled
  • Door glass included, other options available
More Info
Sold out
Wood/Finish: Black on Ash

Choose Your Customizations

Back to Standard Version Want no changes afterall?
  • Available Customizations

    If you need any assistance, please reach out. We are happy to help you!

    Overview: What You Can Customize

    • Make it a 2-tone
    • Choose a different hardware color
    • Lower the speaker shelf
    • Reduce the width from the center section
    • Add or reduce the console's depth

    Make It 2-Tone

    You can optionally select a second wood/finish to make this a 2-tone unit. Choose No if you want the entire console to be in a single wood/finish. In 2-tone units, the second wood/finish is used for the drawer fronts and/or door frames.

    2-Tone Wood/Finish

    Swatches appear when you choose to build a 2-tone. Choose the wood/finish for the drawer fronts and/or door frames.

    Knob/Hinge Color

    Choose your desired knob and hinge color. You can choose Satin Nickel (used on standard Black Ash Havens), Oil-rubbed Bronze (used on all other standard Havens), or Black Bronze.

    customize your Haven media console's hardware color

    Speaker Shelf Modification

    Lower the speaker shelf to accommodate a taller center channel speaker or gear. The standard adjustment is the maximum we can lower the shelf while leaving the drawer fully functional as a media drawer. The standard adjustment to Havens results in an increase of available shelf height increases from 10-1/8" to 10-7/8". Lowering the shelf means that our center grill add-on option will no longer fit.

    TIP: The rear opening behind the speaker shelf of standard Haven consoles is 11-1/2" tall. Great for loading extra tall and/or extra heavy speakers or components. Plus, if you don't mind the front face frame of the cabinet slightly overlapping your speaker (ideally just the box and not sound-producing areas) you can fit a speaker taller than 10-1/8" but without modification!

    Custom Speaker Shelf Height

    This question appears when you choose a custom shelf adjustment. Make sure to enter an amount greater than the height of your speaker by at least 1/4" inch. An 11" tall speaker shelf, for example, will not fit an 11" tall speaker.

    Width Reduction from Center Section

    Choose 2" Increment to select the amount, in 2" increments, to reduce width from the middle section. If you choose Custom Amount, you will enter the precise amount to reduce the width.

    Width Reduction Amount

    Choose to reduce width by 2", 4", 6" or 8".

    Custom Width Reduction Amount

    This question appears when you choose a custom width reduction. Enter an amount under 8".

    Depth Addition

    You can add 2", 4" or a custom amount (up to 4") to the depth. Any amount over 24" adds significant labor that is reflected in the price.

    Custom Depth Addition Amount

    This question appears when you choose a custom depth reduction. Enter an amount less than 4".

    Depth Reduction

    This option appears when you choose no depth addition. Standard depth reductions are in 2" increments. If you choose a custom depth reduction, you will then need to enter an amount under 6". Adjustable shelves are adjusted in depth as well.

    Depth Reduction Amount

    Choose to reduce depth width by 2", 4", 6".

    Custom Depth Reduction Amount

    This question appears when you choose to make a custom reduction adjustment. Enter an amount under 6".

  • Standard Specifications


    Overall: 64w 26.5h 22d

    Enclosures: 19.75w 20.5h 20.25d

    Center Speaker Shelf: 21.25w 9.5625h 20.25d

    Adjustable Vented Wood Shelves: 19.5w .5h 16d

    Front floor clearance: 2.25h

    Rear floor clearance: 3.75h

    Shelf Spacing: 32mm (11 positions)


    Top Shelf: ~200 lb

    Adjustable Vented Wood Shelf: ~60 lb each

    Bottom Wood Shelf: ~95 lb each side

    Drawer: 25 lb

    Enclosure: Up to 3 A/V components each

    Media Drawer Storage: about 102 CDs, 56 Blu-Rays, or 48 DVDs each
    (possibly more if you store DVDs and Blu-Rays on their short side)

    Make sure that your gear will have adequate airspace around it, especially top-venting components, as excessive heat can harm A/V gear and furniture. Easy-to-install, ultra-quiet fan panel kits available.


    Top Panel, End Panels, Fixed Middle Shelf, Face Frame, Door Frames, Drawer Front, Feet: Solid Ash, Cherry, or Walnut Lumber

    Partition Panels, Wood Shelves, Bottom Panel: Lumber-banded Select Ash, Cherry, or Walnut A1 Veneer Core Plywood Veneer

    Back Panels, Drawer Dividers: Birch A1 veneer core plywood veneer

    Drawer Box sides: 9-layer American Baltic Birch (fully finished)

    Door Glass: Tempered Safety, 1/8" (clear or dark gray tint)

    Hinges: no-mortise

    Door and Back Panel Catches: Roller

    Knobs: Zinc die-cast, oil-rubbed bronze or satin nickel finish

    Drawer Slides: Accuride zinc, ball-bearing, full-extension, 100 lb. rating

    Wheels: 50MM diameter, soft rubber, non-marking, fixed 1 direction

    All lumber responsibly grown and harvested from the Appalachian Hardwood Region of the Eastern USA. All plywood made in USA, no formaldehyde added, and fully CARB compliant.


    Shipment: 215-225 lb (carton on shipping pallet + glass box)

    Console in Carton: 160-175 lb

    Bare Console: 135-150 lb

    In the Box

    1 x Standout Haven EX 64w Media Console

    4 x Adjustable vented wood shelves with 16 supports

    2 x Tempered door glass panes (gray tint or clear)

    3 x Drawer dividers with 6 brackets

    1 x Anti-tip safety strap kit

    1 x 4mm hex wrench (for front leveler adjustment)

    1 x Owner's Guide

  • Shipping and Delivery
    Lookup Transit Time

Customer Reviews

Based on 4 reviews
Customized Haven 64 Console

This is my second purchase of a Designs Standout product and the Haven 64 I just bought is as AWESOME as the custom Horizon console I bought last year. Quality is superb. Truly beautiful American craftsmanship. The thoughtfulness put into the design is amazing I am able to run all my wiring internally. These are the Absolute best audio consoles I have ever owned. Alan and his team are so wonderful to work with they customized both consoles for me and they are PERFECT!!!!!! If you want an audio console this is the place to get one!!!!!

The Only Media Console Worth the Name

We looked at literally hundreds of “media consoles” online and came up with nothing that was designed to hold home theater components. The Haven 64” fits a 55” screen comfortably and has more than enough room for a home theater receiver, DVD player, CD player, power conditioner, headphone amp, and modem. Vented shelves, a center channel shelf, removable back panels, wire chase holes, gray tinted door glass, comfortable viewing height and wheels made this the perfect solution.

This is a solid handcrafted piece of furniture that looks great. The natural walnut was more expensive than ash or cherry but the depth and beauty of the wood was worth the extra cost. Wood samples were available.

Our console arrive ahead of schedule in perfect condition. White glove delivery was not available in our area so we were a bit concerned about moving the console into the house. With the drawer, shelves, and back panels removed it was pretty manageable.

We couldn’t be happier with the purchase.

Awesome Console Table

We love the table from Stand Out Design! They thought of everything to make it easy to wire, move, organize and make wiring changes as needed. The back pop out for easy access. I have save many hours in comparison to the big clunky amoirre we replaced this with. We love the contemporary design, quality and the personalized service we received. Nice to get high quality, yet affordable furniture made in the USA.