OOTS Description - SD82HAV26R

Haven EX 82w Dimensions

  • Overall: 82w 26.5h 22d
  • Enclosures: 19.75w 20.5h 20.25d
  • Center Shelf: 39.25w 10.125h 20.25d
  • Adjustable Vented Wood Shelves: 19.5w .5h 16.25d
  • Front floor clearance: 2.25h
  • Rear floor clearance: 3.75h
  • Shelf Spacing: 32mm (11 positions)

Feature Summary

  •  Made in USA – No Assembly Required!
  • Solid Pennsylvania Walnut, Cherry and/or Ash lumber
  • Flush sides, mitered doors, dovetail drawers
  • TV Stand for Flatscreen TVs to 90"class (diagonal)
  • Houses up to 6 typical A/V components in enclosures
  • Ultra-Wide center channel speaker shelf
  • Choice of clear or tinted door glass (IR remote-friendly)
  • 4 adjustable vented wood shelves
  • Hidden wheels (roll forward/back)
  • Removable back panels – convenient gear loading!
  • Easy, neat wire management
  • Media drawers with movable/removable dividers
  • Vented bottom, shelves, back panels
  • Options include exhaust fans, grills, wood door panels

Available Variations

  • Black on Ash + Nickel hardware
  • Black on Ash with Natural Walnut accents + Oil-rubbed bronze hardware
  • Espresso on Cherry + Oil-rubbed bronze hardware
  • Rose on Cherry + Oil-rubbed bronze hardware
  • Sunrise on Cherry + Oil-rubbed bronze hardware
  • Natural Walnut + Oil-rubbed bronze hardware (Nickel on request)
  • 72-inch-wide also available

NOTE: Cherry options naturally deepen and darken over time, particularly the Sunrise. Sunrise units take on a ruddy brown hue after about 6 months to a year.

Capacity

  • Top Shelf: ~200 lb
  • Adjustable Vented Wood Shelf: ~60 lb each
  • Bottom Wood Shelf: ~95 lb each side
  • Drawer: 25 lb each
  • Enclosure: Up to 3 A/V components each
  • Media Drawer Storage: ~72 DVDs, ~86 Blue-Ray, or ~105 CDs each

Make sure that your gear will have adequate air space around it, especially top-venting components, as excessive heat can harm A/V gear and furniture. Easy-to-install, ultra-quiet fan panel kits available.

Product Weight

  • Shipment: 245–260 lb (carton on shipping pallet + glass box)
  • Console in Carton: 185–200 lb
  • Bare Console: 155–170 lb

Materials

  • Top Panel, End Panels, Face Frame, Door Frames, Drawer Fronts, Feet: Solid Ash, Cherry, or Walnut Lumber
  • Partition Panels, Fixed Middle Shelf, Wood Shelves, Bottom Panel: Lumber-banded Select Ash, Cherry, or Walnut A1 Veneer Core Plywood Veneer
  • Back Panels, Drawer Dividers: Birch A1 veneer core plywood veneer
  • Drawer Box sides: 9-layer American Baltic Birch (fully finished)
  • Door Glass: Tempered Safety, 1/8" (clear or dark gray tint)
  • Hinges: no-mortise
  • Door and Back Panel Catches: Roller
  • Knobs: Zinc die-cast, oil-rubbed bronze or satin nickel finish
  • Drawer Slides: Zinc, ball-bearing, full-extension, 100 lb. rating
  • Wheels: 50MM diameter, soft rubber, non-marking, fixed 1 direction

All lumber responsibly grown and harvested from the Appalachian Hardwood Region of the Eastern USA. All plywood made in USA, no formaldehyde added, and fully CARB compliant.

In the Box

  • 1 x Standout Haven EX 82w Media Console
  • 4 x Adjustable vented wood shelves with 16 supports
  • 2 x Tempered door glass panes (clear or gray tint)
  • 6 x Drawer dividers with 12 brackets
  • 2 x Anti-tip safety strap kit
  • 1 x 4mm hex wrench (for front leveler adjustment)
  • 1 x Owner's Guide