OOTS Description - SD64HAV26R

Haven EX 64w Dimensions

  • Overall: 64w 26.5h 22d
  • Enclosures: 19.75w 20.5h 20.25d
  • Center Shelf: 21.25w 9.5625h 20.25d
  • Adjustable Vented Wood Shelves: 19.5w .5h 16.25d
  • Front floor clearance: 2.25h
  • Rear floor clearance: 3.75h
  • Shelf Spacing: 32mm (11 positions)

Feature Summary

  •  Made in USA – No Assembly Required!
  • Solid Pennsylvania Walnut, Cherry and/or Ash lumber
  • Flush sides, mitered doors, dovetail drawers
  • TV Stand for Flatscreen TVs to 70"class (diagonal)
  • Houses up to 6 typical A/V components in enclosures
  • Wide center channel speaker shelf
  • Choice of clear or tinted door glass (IR remote-friendly)
  • 4 adjustable vented wood shelves
  • Hidden wheels (roll forward/back)
  • Removable back panels – convenient gear loading!
  • Easy, neat wire management
  • Media drawer with movable/removable dividers
  • Vented bottom, shelves, back panels
  • Options include exhaust fans, grills, wood door panels

Available Variations

  • Black on Ash + Nickel hardware
  • Black on Ash with Natural Walnut accents + Oil-rubbed bronze hardware
  • Espresso on Cherry + Oil-rubbed bronze hardware
  • Rose on Cherry + Oil-rubbed bronze hardware
  • Sunrise on Cherry + Oil-rubbed bronze hardware
  • Natural Walnut + Oil-rubbed bronze hardware (Nickel on request)

NOTE: Cherry options naturally deepen and darken over time, particularly the Sunrise. Sunrise units take on a ruddy brown hue after about 6 months to a year.

Capacity

  • Top Shelf: ~200 lb
  • Adjustable Vented Wood Shelf: ~60 lb each
  • Bottom Wood Shelf: ~95 lb each side
  • Drawer: 25 lb
  • Enclosure: Up to 3 A/V components each
  • Media Drawer Storage: TBD

Make sure that your gear will have adequate airspace around it, especially top-venting components, as excessive heat can harm A/V gear and furniture. Easy-to-install, ultra-quiet fan panel kits available.

Product Weight

  • Shipment: 215–225 lb (carton on shipping pallet + glass box)
  • Console in Carton: 160-175 lb
  • Bare Console: 135–150 lb

Materials

  • Top Panel, End Panels, Fixed Middle Shelf, Face Frame, Door Frames, Drawer Front, Feet: Solid Ash, Cherry, or Walnut Lumber
  • Partition Panels, Wood Shelves, Bottom Panel: Lumber-banded Select Ash, Cherry, or Walnut A1 Veneer Core Plywood Veneer
  • Back Panels, Drawer Dividers: Birch A1 veneer core plywood veneer
  • Drawer Box sides: 9-layer American Baltic Birch (fully finished)
  • Door Glass: Tempered Safety, 1/8" (clear or dark gray tint)
  • Hinges: no-mortise
  • Door and Back Panel Catches: Roller
  • Knobs: Zinc die-cast, oil-rubbed bronze or satin nickel finish
  • Drawer Slides: Zinc, ball-bearing, full-extension, 100 lb. rating
  • Wheels: 50MM diameter, soft rubber, non-marking, fixed 1 direction

All lumber responsibly grown and harvested from the Appalachian Hardwood Region of the Eastern USA. All plywood made in USA, no formaldehyde added, and fully CARB compliant.

In the Box

  • 1 x Standout Haven EX 64w Media Console
  • 4 x Adjustable vented wood shelves with 16 supports
  • 2 x Tempered door glass panes (clear or gray tint)
  • 3 x Drawer dividers with 6 brackets
  • 1 x Anti-tip safety strap kit
  • 1 x 4mm hex wrench (for front leveler adjustment)
  • 1 x Owner's Guide