Because we offer so many different woods, finishes, and layouts, we do not keep a lot of inventory. The following indicators are provided to help you plan your purchase.
1. Sometimes Stocked. You can sometimes find this particular console (this particular style and wood/finish) ready to ship because it is pretty popular and we regularly make it. Because it is popular, it might also be out of stock at times, but with shorter wait times because we build it pretty frequently.
2. Not Often Stocked. You might occasionally find this console in stock. In the case of Cherry consoles, you might see shorter wait times for a period of time because until we lock in the stain toward the end of the building process, it can be made into any of our Cherry stain offerings.
3. Made Just for You. This designation applies to Walnut and a few models where the alternate configuration (e.g. all drawers) is not in huge demand but we are prepared to build it when required.
Overall: 82w 26.5h 22d
Enclosures: 19.75w 20.5h 20.25d
Adjustable Vented Wood Shelves: 19.5w .5h 16d
Front floor clearance: 2.25h
Rear floor clearance: 3.75h
Shelf Spacing: 32mm (11 positions)
Top Shelf: ~200 lb
Adjustable Vented Wood Shelf: ~60 lb each
Bottom Wood Shelf: ~95 lb each side
Drawer: 25 lb
Enclosure: Up to 3 A/V components each
Media Drawer Storage: about 102 CDs, 56 Blu-Rays, or 48 DVDs each
(possibly more if you store DVDs and Blu-Rays on their short side)
Make sure that your gear will have adequate airspace around it, especially top-venting components, as excessive heat can harm A/V gear and furniture. Easy-to-install, ultra-quiet fan panel kits available.
Top Panel, End Panels, Face Frame, Door Frames, Drawer Front, Feet: Solid Ash, Cherry, or Walnut Lumber
Partition Panels, Wood Shelves, Bottom Panel: Lumber-banded Select Ash, Cherry, or Walnut A1 Veneer Core Plywood Veneer
Back Panels, Drawer Dividers: Birch A1 veneer core plywood veneer
Drawer Box sides: 9-layer American Baltic Birch (fully finished)
Door Glass: Tempered Safety, 1/8"" (clear or dark gray tint)
Door and Back Panel Catches: Roller
Knobs: Zinc die-cast, oil-rubbed bronze or satin nickel finish
Drawer Slides: Accuride zinc, ball-bearing, full-extension, 100 lb. rating
Wheels: 50MM diameter, soft rubber, non-marking, fixed 1 direction
All lumber responsibly grown and harvested from the Appalachian Hardwood Region of the Eastern USA. All plywood made in USA, no formaldehyde added, and fully CARB compliant.
Shipment: 270-285 lb (carton on shipping pallet + glass box)
Console in Carton: 215-235 lb
Bare Console: 180-195 lb
1 x Standout Haven EX 82w Media Console
4 x Adjustable vented wood shelves with 16 supports
2 x Tempered door glass panes (gray tint or clear)
12 x Drawer dividers with 24 brackets
1 x Anti-tip safety strap kit
1 x 4mm hex wrench (for front leveler adjustment)
1 x Owner's Guide
Well it's been almost a week since delivery of my Haven 82 and I just wanted to send you a note of thanks and a few pictures to let you know how things went with the delivery and setup. The ABF guy's were great. The shipping box was pristine, not a mark on it. They removed it from the pallet, carried it in the house and unwrapped it for me.
Setting it up in the room with my equipment was a piece of cake. You thought of everything in designing this unit! Cable routing and power distribution was so easy! I even used the space behind the lower drawers to place the power transformer for my pre-amp. And the way the rear panels just snap in and out was something I was not expecting. Such a nice touch.
Fit and finish inside and out are superb. I couldn't be happier. Thanks so much for building such a high quality product!
Best regards to you and your crew. You guys do awesome work!
Made here, in the United States. Beautiful work - in walnut - and after a week, it still has that "new wood smell." This cabinet was delivered two days before Irma hit us. The delivery guys were fantastic. You can see from the photo that the artisans matched the wood grain across the front of the cabinet. You might think that is no big deal - just a couple of cuts - but the thought that went into saving those pieces to finish the front - says a great deal about the superior workmanship that went into making this cabinet. I purchased the pull out shelf as well. While I had a few anxious moments getting it installed - it works beautifully. The drawer option was best for me - to provide DVD storage - and the drawers are quite ample storage. I am very pleased with this purchase - worth every penny. Alan has been great, too - keeping me apprised of progress and delivery. What a great furniture addition to my home.
The console was delivered last week and arrived in pristine condition due to the great packaging; the shippers were very careful unpacking and moving it. The console easily accommodated a 75" TV and all the associated equipment. I finished the set-up and wiring yesterday and the console proved to be as practical as it is beautiful -- adjusting shelves and configuring the wiring for all the components was a breeze. The layout of the console gave me the confidence to tackle the job myself rather than hiring someone; saved some $$$! To my wife's relief the wires are all concealed; to my satisfaction this wonderful piece of furniture was made in the U.S.
We ordered the combination walnut and black ash and it was a good choice. It looks contemporary and modern, yet the warmth of the walnut gives it a classic, old-school touch. Alan and his crew were nice enough to entertain our request to fabricate a matching coffee table and these two pieces are simply stunning in our family room. The furniture is not inexpensive, but worth every cent. In furnishing our home, I made a concerted effort to find products sourced and built in the United States. It may cost a bit more, but proved to be worth it across the board. I believe you get what you pay for and this purchase is an excellent value. The workmanship is first-rate, the features of the console are functional and have clearly been thought through by the designers, and the pieces themselves are just plain beautiful.
As an aside: The customer service was impeccable. Alan immediately responded to my emails and calls, and was extremely helpful throughout the process. You just don't find that in most companies nowadays. When we begin to entertain family and friends, I will sing the praises of Standout Designs; I would encourage anyone in the market to consider their products.
Thank you standout designs for this beautiful walnut a/v stand. Love the wire management / ease of use , and best of all , it's made in America !!
Just wanted to say the console is exceptional. The electronic equipment installers even remarked on the quality and how functional the piece is.
Standout Designs furniture and accessories ship within the continental United States and to the provinces of Canada.
Furniture and accompanying accessories ship via national freight carrier ("LTL truck").
Accessories not shipping with your furniture ship via UPS, USPS or another parcel service.
Shipments originate in Pennsylvania.
Furniture will be brought to your home and out of bad weather. This is normally into your home but might be into the garage at delivery person's discretion.
If you live in an apartment building, a freight elevator is required to deliver above the ground floor.
Want or require unpacking, placement, dunnage removal or stair carry beyond a few external steps manageable with a hand-truck, choose White Glove Delivery.
See below for other fees associated with Canadian delivery.
White Glove Delivery is performed by one or two people depending on the size of the pieces ordered and whether or not flights of stairs are involved. Available to most of the continental USA. If not offered in Checkout, it is not available to your address.
Your furniture will be brought to the room of your choice, unpacked, and positioned. Dunnage will also be removed upon request.
Additional charges will apply to carry the furniture up/down more than two flights of internal stairs. Please contact us for more information.
Per our return policy, you must retain the packaging, including the shipping pallet, in order to return a furniture piece.
The delivery team does not install shelves, door glass, or accessories nor do they handle electronics.
White Glove Delivery is available to most USA customers. Canadian customers can contact us for a White Glove Delivery quote. Not available to all areas.
White Glove Delivery adds 1-3 business days to transit time.
Furniture deliveries are made Monday – Friday during normal business hours, excluding major holidays.
Deliveries are made by appointment with the freight carrier. Appointment windows are typically between 2-4 hours.
Appointment days and times are set by the carrier and vary by location.
You must be present to inspect and sign for the shipment.
We are pleased to offer Standout Designs furniture to our neighbors to the north.
GST/PST is additional and is not collected by Standout Designs.
You must engage a broker to speed your furniture through customs.
We can recommend Pacific Customs Brokers ("PCB"). The fee for Standout customers is CA$110 plus a nominal credit card processing fee.
You can contact PCB at 888-538-1566 for more information. Be sure to mention Standout Designs when you call.
We can also work with a different broker that you designate.
If all furniture items on your order are in stock, we typically ship your order the next business day (possibly the same day if early enough in the morning).
Lead times vary for out of stock items from 1-8 weeks and we connect with you before shipping.
Your shipment will most likely take from 1 to 5 business days in transit to reach you.
For White Glove Delivery, add an extra 1-2 business days.
Delivery to some zip codes may be longer.