Because we offer so many different woods, finishes, and layouts, we do not keep a lot of inventory. The following indicators are provided to help you plan your purchase.
1. Sometimes Stocked. You can sometimes find this particular console (this particular style and wood/finish) ready to ship because it is pretty popular and we regularly make it. Because it is popular, it might also be out of stock at times, but with shorter wait times because we build it pretty frequently.
2. Not Often Stocked. You might occasionally find this console in stock. In the case of Cherry consoles, you might see shorter wait times for a period of time because until we lock in the stain toward the end of the building process, it can be made into any of our Cherry stain offerings.
3. Made Just for You. This designation applies to Walnut and a few models where the alternate configuration (e.g. all drawers) is not in huge demand but we are prepared to build it when required.
Overall: 72w 24.375h 22d
Enclosures: 19.75w 19.375h 20d
Center Shelf: 28w 9.625h 20d
Adjustable Vented Wood Shelves: 19.5w .5h 16d
Rear floor clearance: 2.25h
Shelf Spacing: 32mm (9 positions)
Top Shelf: ~200 lb
Adjustable Vented Wood Shelf: ~60 lb each
Bottom Wood Shelf: ~95 lb each side
Drawer: 25 lb
Enclosure: Up to 3 A/V components each
Media Drawer Storage: about 170 CDs, 84 Blu-Rays, or 72 DVDs
(possibly more if you store DVDs and Blu-Rays on their short side)
Make sure that your gear will have adequate airspace around it, especially top-venting components, as excessive heat can harm A/V gear and furniture. Easy-to-install, ultra-quiet fan panel kits available.
Top Panel, End Panels, Fixed Middle Shelf, Door Frames, Drawer Front, Base: Solid Ash, Cherry, or Walnut Lumber
Partition Panels, Wood Shelves, Bottom Panel: Lumber-banded Select Ash, Cherry, or Walnut A1 Veneer Core Plywood Veneer
Back Panels, Drawer Dividers: Birch A1 veneer core plywood veneer
Drawer Box sides: 9-layer American Baltic Birch (fully finished)
Door Glass: Tempered Safety, 1/8"" (clear or dark gray tint)
Hinges: Salice soft-close, self-close
Knobs and Pull: Zinc die-cast, satin nickel finish
Drawer Slides: Accuride zinc, ball-bearing, full-extension, 100 lb. rating
Wheels: 50MM diameter, soft rubber, non-marking, fixed 1 direction
All lumber responsibly grown and harvested from the Appalachian Hardwood Region of the Eastern USA. All plywood made in USA, no formaldehyde added, and fully CARB compliant.
Shipment: 225–230 lb (carton on shipping pallet + glass box)
Console in Carton: 165-180 lb
Bare Console: 130–145 lb
My husband and I needed a custom media console.
We searched and searched for the right piece of furniture that would properly house the media equipment, and compliment our family room also. Thanks be to God, we came across Standout Designs. We worked closely with Alan, and our experience was a 10! Three yeas later, we continue to enjoy the custom media console. It is exactly what we wanted, and the final product exceeded our expectations. On top of that, the fact that it was made in the USA was the icing on the cake! Kudos to Alan and his hard working and dedicated team. Keep up the great work everyone! God's blessings. Mark and Josie
Very happy with my Horizon console. I love the thoughtful design, removable backs, wire routing holes, etc. Looks fantastic, made well, my wife even gives it high praises.
It exactly what we needed and looks great. Easy access to cables when needed. Will likely get another for den.
After an exhaustive search to find a great piece of custom TV furniture I finally landed here. Very good customer experience from Alan. Custom sizes allow for your own electronics set up from speakers to the TV size. Wheels make it easily movable. Arrived on schedule in perfect condition and the set up was very basic. Great to see made that it's made here in the USA too.
I would not hesitate to buy from Standout Designs. Great quality.
Standout Designs furniture and accessories ship within the continental United States and to the provinces of Canada.
Furniture and accompanying accessories ship via national freight carrier ("LTL truck").
Accessories not shipping with your furniture ship via UPS, USPS or another parcel service.
Shipments originate in Pennsylvania.
Furniture will be brought to your home and out of bad weather. This is normally into your home but might be into the garage at delivery person's discretion.
If you live in an apartment building, a freight elevator is required to deliver above the ground floor.
Want or require unpacking, placement, dunnage removal or stair carry beyond a few external steps manageable with a hand-truck, choose White Glove Delivery.
See below for other fees associated with Canadian delivery.
White Glove Delivery is performed by one or two people depending on the size of the pieces ordered and whether or not flights of stairs are involved. Available to most of the continental USA. If not offered in Checkout, it is not available to your address.
Your furniture will be brought to the room of your choice, unpacked, and positioned. Dunnage will also be removed upon request.
Additional charges will apply to carry the furniture up/down more than two flights of internal stairs. Please contact us for more information.
Per our return policy, you must retain the packaging, including the shipping pallet, in order to return a furniture piece.
The delivery team does not install shelves, door glass, or accessories nor do they handle electronics.
White Glove Delivery is available to most USA customers. Canadian customers can contact us for a White Glove Delivery quote. Not available to all areas.
White Glove Delivery adds 1-3 business days to transit time.
Furniture deliveries are made Monday – Friday during normal business hours, excluding major holidays.
Deliveries are made by appointment with the freight carrier. Appointment windows are typically between 2-4 hours.
Appointment days and times are set by the carrier and vary by location.
You must be present to inspect and sign for the shipment.
We are pleased to offer Standout Designs furniture to our neighbors to the north.
GST/PST is additional and is not collected by Standout Designs.
You must engage a broker to speed your furniture through customs.
We can recommend Pacific Customs Brokers ("PCB"). The fee for Standout customers is CA$110 plus a nominal credit card processing fee.
You can contact PCB at 888-538-1566 for more information. Be sure to mention Standout Designs when you call.
We can also work with a different broker that you designate.
If all furniture items on your order are in stock, we typically ship your order the next business day (possibly the same day if early enough in the morning).
Lead times vary for out of stock items from 1-8 weeks and we connect with you before shipping.
Your shipment will most likely take from 1 to 5 business days in transit to reach you.
For White Glove Delivery, add an extra 1-2 business days.
Delivery to some zip codes may be longer.