Highlighted Features

100% Solid Wood Cabinet, Made in the USA

The Grand is made from Pennsylvania solid lumber chosen for its beauty, strength and sustainability. You won't find any particleboard, MDF, veneer, or laminates here - even the back panel is made from responsibly-harvested American solid wood.

Hidden Fixed Wheels and Levelers

The Grand's stylish brushed nickel feet feature concealed fixed wheels to assist in moving the cabinet forward and backward for convenient equipment access from the rear. Plus, levelers adjustable from inside the cabinet make leveling on floors easier.

Dual-zone Quiet Exhaust System

Each enclosure features a thermo-controlled exhaust fan that spins at 1000 RPM, emits less than 16 dBa, yet moves nearly 40 CFM. Controllers turn fans on at ~87 F and off at ~80 F using an internal sensor or external probe at the source. Fans feature quiet, long-lasting SONY-designed fluid dynamic ball-bearings.

Ultra-Flexible Lower Media Drawer

The Grand's dovetail bottom media drawer features sliding dividers so you can easily store a mix of movies, music, and games. Or remove the dividers and use as a regular drawer.

Large Center Channel Speaker/Media Drawer

Conceal your center channel speaker and maybe even some media in the Grand's top dovetail drawer. Remove it to fit an even larger center speaker. With an optional conversion kit you can also transform the top drawer into a full-fledge media drawer like the bottom drawer.

Vented Bottom Panel

Front air vents in the Grand's bottom allow its fans to draw cooler ground-level air into the enclosures. Removable vent grommets block "dust bunnies" and allow for easy cleaning.

Vented Tempered Adjustable Shelves

The Grand's adjustable tempered safety glass shelves allow cool air brought in by the fans to flow up and around components for maximum heat extraction. Multiple shelf positions allow for flexible component placement.

Removable Solid Wood Back Panels

All of the Grand's back panels are removable, giving you convenient access to equipment from the rear. Thumb screws mean no tools are required and threaded inserts mean frequent access produces no wear-and-tear on the cabinet.

Dimension

Dimensions presented as HWD (height x width x depth) in inches

Please make sure your gear fits before ordering!

• Overall Cabinet: 22 x 70 x 22
• Enclosures: 18 x 19-3/4 x 19-15/16* (each)
• Center shelf:
  • Inside Drawer: 7-3/4 x 24-15/16 x 14-3/8
  • Drawer Removed: 8-9/16 x 27 x 20*
• Drawer box: 3-1/4 x 24-15/16 x 14-3/8 (interior walls)
• Vented Adjustable Shelves: 1/4 x 19-1/2 x 16-1/4

* For 1-5/8" of each side enclosure, inside depth is 3/4" less due to back stiffener. For 1-5/8" on both the left and right side of middle area, inside depth is 3/4" less due to back stiffener. Use of wood panel inserts in doors reduces inside depth by 3/4".

Capacities

Weight Capacities

• Top Shelf: 250 lbs
• Glass Shelf: 50 lbs each
• Bottom Shelf: 85 lbs each side

Storage Capacities

• Bottom Drawer: 88 DVDs (66 spine-readable) or 124 CDs (each)

Equpiment Capacities

This cabinet has been designed with two components per enclosure in mind. Placing three or more components in an enclosure, while possible, may harm the cabinet and/or your equipment if excessive heat is allowed to build up inside. Make sure your components have sufficient space above for adequate airflow (at least two inches recommended; more for very hot components). Please plan accordingly and consult your electronics documentation before ordering.

Materials

Wood Parts

• Cabinetry:
  • Solid 4/4 Pennsylvania White Ash (Black and Espresso)
  • Solid 4/4 Pennsylvania Soft Maple (Cinnamon and Espresso)
  • Finished Panel Thicknesses
    • Top, bottom, ends, partitions, 3/4"
    • Door and drawer front frames, back panels, 3/4"

  Other Parts

  • Glass:
    • Door - Tempered Safety, 1/8", seamed edge
    • Shelf - Tempered Safety, 1/4", pencil edge
  • Hardware:
    • Feet - Steel, nickel plated, brushed satin finish
    • Knobs - Aluminum, nickel plated, brushed satin finish
    • Hinges - Salice 6-way adjustable cup, nickel finish
    • Wheels - 50mm diameter, fixed, polyurethane
  • Finish:
    • Low VOC water- based stain
    • Pre-catalyzed lacquer topcoat
    • Sherwin-Williams industrial/professional
    • All surfaces finished, including backs and interiors

Shipping

This item ships via LTL Ground Truck. Delivery is by appointment and you must inspect and sign for delivery.

• Total shipping weight: 245 lbs (furniture + pallet)*
• Item weight packed in carton: 184 lbs*
• Item weight unpacked and bare: 158 lbs*
• Main carton dimensions (HWD): 25" x 77" x 27"

* Weights are approximate and based on Ash (our heaviest species); Maple units weigh slightly less. A high estimate of 50 lbs used for pallet. Doors, drawer boxes and back panels can be removed to reduce carrying weight.

Delivery Options and Rates

Rather than fold shipping into our prices and call it "free", we let you choose the service you want based on your budget and your needs.

Shipping Options and Rates

Look Up Transit Time

For more about shipping, please see our Shipping Info page.