Highlighted Features
100% Solid Wood Cabinet
The Angle is made from Pennsylvania solid lumber chosen for its beauty, strength and sustainability. You won't find any particleboard, MDF, veneer, or laminates here - even the back panel is made from responsibly-harvested American solid wood. Hidden Fixed Wheels and Levelers
The Angle's stylish brushed nickel feet feature concealed fixed wheels to assist in moving the cabinet forward and backward for convenient equipment access from the rear. Plus, levelers adjustable from inside the cabinet make leveling on floors easier. Dual-zone Quiet Exhaust System
Each enclosure features a thermo-controlled exhaust fan that spins at 1000 RPM, emits less than 16 dBa, yet moves nearly 40 CFM. Controllers turn fans on at ~82 F and off at ~77 F using an internal sensor or external probe at the source. Fans feature quiet, long-lasting SONY-designed fluid dynamic ball-bearings. Vented Bottom Panel
Front air vents in the Angle's bottom allow the fans to draw cooler ground-level air into the enclosures. Removable vent grommets block "dust bunnies" and allow for easy cleaning. Vented Tempered Adjustable Shelves
The Angle's adjustable tempered safety glass shelves allow cool air brought in by the fans to flow up and around components for maximum heat extraction. Multiple shelf positions allow for flexible component placement. Removable Solid Wood Back Panel
The Angle's removable back panel provides convenient access to equipment from the rear. Thumb screws mean no tools are required and threaded inserts mean frequent access produces no wear-and-tear on the cabinet. Dimensions (HWD - inches)
Dimensions presented as HWD (height x width x depth) in inches
Please make sure your gear fits before ordering!
- Overall Cabinet: 22 x 58 x 22
- Enclosures: (review illustration below)
- At the widest: 18 x 19-3/4 x 16-1/4 (each)
- At the deepest: 18 x 16-1/16 x 19-5/8 (each)
- Side Shelf Areas: 18 x 7 x 8-1/2 (each)
- Distance from wall to midpoint of back: 17-7/16"
- Distance from front corner to start of taper: 10-3/8"
TOP FOOTPRINT
HOW THE ANGLE FITS INTO A CORNER
INTERIOR FOOTPRINT OF LEFT ENCLOSURE (mirror for right side)
To illustrate how the Angle's tapered enclosures accommodate components, the above shows the footprint of one measuring 17-1/4" W by 16" D, centered horizontally and set back 1/2".
Capacities
Weight Capacities
- Total Weight: 450 lbs max
- Top Shelf: 200 lbs
- Glass Shelf: 50 lbs each
- Bottom Shelf: 85 lbs each side
Equipment Capacities
This cabinet has been designed with two components per enclosure in mind. Placing three or more components in an enclosure, while possible, may harm the cabinet and/or your equipment if excessive heat is allowed to build up inside. Make sure your components have sufficient space above for adequate airflow (at least two inches recommended; more for very hot components). Please plan accordingly and consult your electronics documentation before ordering.
Materials
Wood Parts
- Cabinetry:
- Solid 4/4 Pennsylvania White Ash (Black and Espresso)
- Solid 4/4 Pennsylvania Soft Maple (Cinnamon)
- Finished Panel Thicknesses
- Top, bottom, ends, partitions, 13/16"
- Door frames, back panels, side shelves, 3/4"
Other Parts
- Glass:
- Door - Tempered Safety, 1/8", seamed edge
- Shelf - Tempered Safety, 1/4", pencil edge
- Hardware:
- Feet - Steel, nickel plated, brushed satin finish
- Knobs - Aluminum, nickel plated, brushed satin finish
- Hinges - Salice 6-way adjustable cup, nickel finish
- Wheels - 50mm diameter, fixed, polyurethane
- Finish:
- Low VOC water-based stain
- Conversion varnish topcoat
- Sherwin-Williams industrial/professional
- All surfaces finished, including backs and interiors
Shipping
This item ships via LTL Ground Truck. Delivery is by appointment and you must inspect and sign for delivery.
- Total shipping weight: 185 lbs (furniture + pallet)*
- Item weight packed in carton: 125 lbs*
- Item weight unpacked and bare: 108 lbs*
- Main carton dimensions (HWD): 26" x 61" x 24"
Delivery Options and Rates
Rates below apply to most of the continental USA and Canada. Some remote and disaster areas (e.g. Martha's Vineyard, British Columbia, New Orleans) may be subject to extra charges. Your will be notified prior to shipping if your order is affected.
Rates are PER SHIPMENT - multiple pieces to the same place at the same time ship for one flat charge!
Service Center Pickup - $99 US / $119 Canada**
Pickup by customer at destination service center. Please make sure your vehicle can fit the furniture carton by reviewing carton sizes.
Super Saver Delivery - $149 US / $169 Canada**
Help out and save $80. Delivery via truck by one person. Lift-gate truck not guaranteed by carrier, so someone must be available to help driver lower furniture off the truck. Inside placement in carton to first floor location navigable by handtruck without harm to furniture or property (no inside steps). Please make sure the help can be safely provided by reviewing product weights.
Standard Delivery - $229 US / $249 Canada**
Delivery via lift-gate truck by one person. The lift-gate allows one person to take the furniture safely off the truck. Inside placement in carton to first floor location navigable by handtruck without harm to furniture or property (no inside steps).
White Glove Delivery - $289 US
Delivery by a 2-person delivery team. Inside placement and unpacking of furniture at desired location within residence, optional removal of packaging after inspection and acceptance by customer (original packing required for returns - see our return policy). Includes stair carry up to two flights (more flights additional). Setup (e.g. insertion of shelves, door glass) is NOT included. ADD 4 to 15 business days to Standard Delivery transit time.
Please note that shipping charges are not included in refunds under our return policy.
For more about shipping, please see our Shipping Info page.
0 Items
$0.00
