Product Home » Haven AV Furniture Collection » Haven Solid Wood AV Consoles
Haven 72 inch Solid Wood TV Console

Standout Customer Testimonial

"I am a big fan of curly maple and I was suprised that the top of the unit had great graining to the wood. I am a wood worker myself and I apreciate the fine work you guys do. " - Mark of Twin Lake, MI about the Horizon N701
NEW!

Haven 72 inch Solid Wood TV Console

  Made in the USA

This low and wide solid wood AV cabinet handles a top-of-the-line center speaker like the Paradigm Studio CC-590 with ease and fits up to 6 components inside two enclosures with mitered wood-frame doors. Its dovetail storage drawer holds media, games and more. Features hidden wheels, 4 vented glass shelves, quiet fans, and removable backs (see more details below). Made in USA. Overall Dimensions: 72" x 26-1/4" H x 22" D.

Also offered in Premium Natural Cherry and Walnut.

LEARN MORE...

Cinnamon on Maple Espresso on Maple Black on Oak Espresso on Oak
Finish:
Glass Choice:

Features

Furniture Features

  • Solid Red Oak or Hard Maple wood cabinet
  • Mitered face frame and door frames
  • Solid wood dovetail drawer boxes
  • Sustainably-harvested lumber
  • Factory-built in the USA, ships assembled

AV Features

  • Spacious open center shelf (HWD 10-1/8 x 29-1/4 x 20-1/2)
  • Room for up to 6 components in 2 enclosures
  • Hidden wheels for moving cabinet forward and back
  • Removable back panels including behind center shelf
  • Ample wire chase holes that fit large plug heads
  • 4 Adjustable vented glass shelves (10 positions)
  • Temperature-controlled quiet exhaust fans, bottom air vents
  • Remote-friendly door glass (choice of clear or gray tint)
  • Media drawers with movable/removable dividers

Have a slightly taller speaker? The height behind face frame is 11-1/2, allowing for speakers taller than 10-1/8. Just load from the rear.

Safety Features

  • Tempered safety door and shelf glass
  • Detachable Anti-tip strap kit included (loop pre-installed)

Dimensions (HWD - inches)

  • Overall Cabinet: 26-1/4 x 72 x 22
  • Enclosure Interior (each): 20-1/2 x 19-3/4 x 20-1/2
  • Center Shelf: 10-1/8 x 29-1/4 x 20-1/2
  • Drawer Box Interior: 3 x 27-1/4 x 14-7/16
  • Vented Glass Shelves: 1/4 x 19-1/2 x 16-1/4
  • Shelf Positions: 10 (32 MM spacing)

Have a slightly taller speaker? The height behind face frame is 11-1/2, allowing for speakers taller than 10-1/8. Just load from the rear.

Specifications

Weight Capacities

  • Top Shelf: 250 lbs
  • Glass Shelf: 50 lbs each
  • Bottom Wood Shelf: 95 lbs each side
  • Drawer: 25 lbs each

Make sure that the equipment that you intend to place inside the console will enjoy sufficient air flow. Consult your electronics documentation before purchasing a console. Excessive heat is harmful to your cabinet and equipment.

Storage Capacities

  • Enclosure: 3 A/V components (each)
  • Media Drawer:
    • 120 DVDs (72 spine-readable) or
    • 145 Blue-Ray (87 spine-readable) or
    • 175 CDs

Store even more in media drawers by removing dividers and storing media perpendicularly.

Wood Parts

  • Top Panel: Solid Pennsylvania Red Oak or Hard Soft Maple
  • Bottom Panel: Solid Pennsylvania Red Oak or Hard Soft Maple
  • End Panels: Solid Pennsylvania Red Oak or Hard Soft Maple
  • Partition Panels: Solid Pennsylvania Red Oak or Hard Soft Maple
  • Face Frame: Solid Pennsylvania Red Oak or Hard Soft Maple
  • Door Frames: Solid Pennsylvania Red Oak or Hard Soft Maple
  • Drawer Fronts: Solid Pennsylvania Red Oak or Hard Soft Maple
  • Drawer Box Sides: Solid Pennsylvania Soft Maple
  • Drawer Box Dividers: Solid Pennsylvania Soft Maple
  • Drawer Box Bottom: All-wood Birch plywood
  • Back Panels: All-wood Birch plywood

Glass Parts

  • Door: Tempered Safety 1/8" (clear or dark gray) - remote friendly
  • Shelf: Tempered Safety 1/4" (clear), pencil edge

Hardware

  • Hinges: No-Mortise
  • Door Catches: Roller
  • Knobs: Zinc die-cast, oil-rubbed bronze or satin-nickel finish
  • Drawer Slides: Zinc, ball-bearing, 100 lb. rating
  • Levelers: 1-1/8" glide base, 5/16"-18 thread
  • Wheels: 50MM diameter
  • Safety Strap Kit: Anti-Tip by Parent Units

Finish

  • Pre-catalyzed lacquer topcoat

Exhaust Fans

  • Sensor: fans triggered on at ~87 F, off at ~80 F
  • Fans: 120MM, 900RPM, 30CFM, 11dBA, .3A, 120K Hrs MTBF
  • AC Adapter: 2A, molex connector

What's Included

  • 1 Solid wood TV console
  • 4 Tempered vented glass shelves with 16 supports
  • 2 Tempered door glass panes (clear or gray)
  • 4 Drawer dividers with 8 brackets
  • 1 AC power adapter
  • 1 Anti-tip safety strap kit
  • 1 Owner's Guide

Shipping


This item ships via LTL Ground Truck. Delivery is by appointment and you must inspect and sign for delivery.
  • Total shipping weight: 0 lbs (furniture + pallet)*
  • Item weight packed in carton: 0 lbs*
  • Item weight unpacked and bare: 0 lbs*
  • Main carton dimensions (HWD): 0" x 0" x 0"

* Weights are approximate and based on Ash (our heaviest species); Maple units weigh slightly less. A high estimate of 50 lbs used for pallet. Doors, drawer boxes and back panels can be removed to reduce carrying weight.

Delivery Options and Rates

Rather than fold shipping into our prices and call it "free", we let you choose the service you want based on your budget and your needs.

Shipping Options and Rates

Look Up Transit Time

For more about shipping, please see our Shipping Info page.