Product Home » Haven AV Furniture Collection » Haven Solid Wood AV Consoles
Haven 52 inch Solid Wood TV Console

Standout Customer Testimonial

"I cannot believe that I found let alone purchased such a nice piece of furniture from the Internet. The craftsmanship was exceptional and the overall design is perfect. There wasn't a dent or scratch on the cardboard let alone the furniture. Thank you for making such a perfect product." - Douglas of Huntersville, NC about the Horizon N582
NEW!

Haven 52 inch Solid Wood TV Console

  Made in the USA

This tall and compact solid wood AV cabinet handles a top-of-the-line center speaker like the Paradigm Studio CC-590 or other gear on its wide open shelf with ease. House up to 4 components inside its enclosure. Two dovetail storage drawers hold media, games and more. Features hidden wheels, 3 vented shelves, quiet fans, and removable backs (see more details below). Made in USA. Overall Dimensions: 52" W x 31-3/8" H x 22" D.

Also offered in Premium Natural Cherry and Walnut.

LEARN MORE...

Cinnamon on Maple Espresso on Maple Black on Oak Espresso on Oak
Finish:
Glass Choice:

Recommended Standout Accessories

Haven 52 inch Premium Solid Wood TV Console
NEW! Haven 52 inch Premium Solid Wood TV Console
Add for $2,099.00

Features

Furniture Features

  • Solid Red Oak or Hard Maple wood cabinet
  • Mitered face frame and door frames
  • Solid wood dovetail drawer boxes
  • Sustainably-harvested lumber
  • Factory-built in the USA, ships assembled

AV Features

  • Spacious open center shelf (HWD 10-1/8 x 28-3/8 x 20-1/2)
  • Room for up to 4 components in 1 enclosure
  • Hidden wheels for moving cabinet forward and back
  • Removable back panels including behind center shelf
  • Ample wire chase holes that fit large plug heads
  • 4 Adjustable vented glass shelves (14 positions)
  • Temperature-controlled quiet exhaust fans, bottom air vents
  • Remote-friendly door glass (choice of clear or gray tint)
  • Media drawers with movable/removable dividers

Have a slightly bigger speaker? The height behind face frame is 11-1/2 and the width is 29-3/4, allowing for slightly taller and/or wider speakers. Just load from the rear.

Safety Features

  • Tempered safety door and shelf glass
  • Detachable Anti-tip strap kit included (loop pre-installed)

Dimensions (HWD - inches)

  • Overall Cabinet: 31-3/8 x 52 x 22
  • Enclosure Interior: 25-3/4 x 19-3/4 x 20-1/2
  • Center Shelf: 10-1/8 x 28 3/8 x 20-1/2
  • Drawer Box Interior: 3 x 26-3/8 x 14-7/16
  • Vented Glass Shelves: 1/4 x 19-1/2 x 16-1/4
  • Shelf Positions: 10 (32 MM spacing)

Have a slightly bigger speaker? The height behind face frame is 11-1/2 and the width is 29-3/4, allowing for slightly taller and/or wider speakers. Just load from the rear.

Specifications

Weight Capacities

  • Top Shelf: 250 lbs
  • Glass Shelf: 50 lbs each
  • Bottom Wood Shelf: 95 lbs each side
  • Drawers: 25 lbs each

Make sure that the equipment that you intend to place inside the console will enjoy sufficient air flow. Consult your electronics documentation before purchasing a console. Excessive heat is harmful to your cabinet and equipment.

Storage Capacities

  • Enclosure: 3 A/V components (each)
  • Upper Media Drawer:
    • 72 DVDs or
    • 87 Blue-Ray
  • Lower Media Drawer:
    • 72 DVDs or
    • 87 Blue-Ray or
    • 175 CDs

Store even more in media drawers by removing dividers and storing media perpendicularly.

Wood Parts

  • Top Panel: Solid Pennsylvania Red Oak or Hard Soft Maple
  • Bottom Panel: Solid Pennsylvania Red Oak or Hard Soft Maple
  • End Panels: Solid Pennsylvania Red Oak or Hard Soft Maple
  • Partition Panels: Solid Pennsylvania Red Oak or Hard Soft Maple
  • Face Frame: Solid Pennsylvania Red Oak or Hard Soft Maple
  • Door Frames: Solid Pennsylvania Red Oak or Hard Soft Maple
  • Drawer Fronts: Solid Pennsylvania Red Oak or Hard Soft Maple
  • Drawer Box Sides: Solid Pennsylvania Soft Maple
  • Drawer Box Dividers: Solid Pennsylvania Soft Maple
  • Drawer Box Bottom: All-wood Birch plywood
  • Back Panels: All-wood Birch plywood

Glass Parts

  • Door: Tempered Safety 1/8" (clear or dark gray) - remote friendly
  • Shelf: Tempered Safety 1/4" (clear), pencil edge

Hardware

  • Hinges: No-Mortise
  • Door Catches: Roller
  • Knobs: Zinc die-cast, oil-rubbed bronze or satin-nickel finish
  • Drawer Slides: Zinc, ball-bearing, 100 lb. rating
  • Levelers: 1-1/8" glide base, 5/16"-18 thread
  • Wheels: 50MM diameter
  • Safety Strap Kit: Anti-Tip by Parent Units

Finish

  • Pre-catalyzed lacquer topcoat

Exhaust Fans

  • Sensor: fans triggered on at ~87 F, off at ~80 F
  • Fans: 120MM, 900RPM, 30CFM, 11dBA, .3A, 120K Hrs MTBF
  • AC Adapter: 2A, molex connector

What's Included

  • 1 Solid wood TV console
  • 4 Tempered vented glass shelves with 16 supports
  • 2 Tempered door glass panes (clear or gray)
  • 6 Drawer dividers with 12 brackets
  • 1 AC power adapter
  • 1 Anti-tip safety strap kit
  • 1 Owner's Guide

Shipping


This item ships via LTL Ground Truck. Delivery is by appointment and you must inspect and sign for delivery.
  • Total shipping weight: 0 lbs (furniture + pallet)*
  • Item weight packed in carton: 0 lbs*
  • Item weight unpacked and bare: 0 lbs*
  • Main carton dimensions (HWD): 0" x 0" x 0"

* Weights are approximate and based on Ash (our heaviest species); Maple units weigh slightly less. A high estimate of 50 lbs used for pallet. Doors, drawer boxes and back panels can be removed to reduce carrying weight.

Delivery Options and Rates

Rather than fold shipping into our prices and call it "free", we let you choose the service you want based on your budget and your needs.

Shipping Options and Rates

Look Up Transit Time

For more about shipping, please see our Shipping Info page.